Features

• Low-profile, aesthetic design.
• Quick projector disconnect/reconnect.
• Steel-into-stell construction.
• UL listed for proven strength.
• Easy installation no assembly.
• Independent roll, pitch and yaw adjustments make it easy to precisely register the projector.
• Disconnect without affecting adjustments.
• Convenient lamp and filter access.
• Flush mount without disassembly.
• Allows cables to be routed through the top of the mount without additional accessories.
• Compatible with a large assortment of accessories to easily overcome a variety of installation challenges.
• Allows lateral shift by adding the LSB-100 Lateral Shift Accessory.
• Compatible with the PG-1 Projector Guard Security Cage.
• Allows natural convection ventilation.
• Three Mounting Methods: - 1. - Flush mount to suitable ceilings using the four corner slots in top of the RPA Mount. The RPA allows you to flush mount without disassembly by providing suitable access for screwdrivers and socket sets. +/-25 degrees of pitch when flush mounted. 12 degrees yaw possible on flush mount with slots in top of RPA (Hardware not included). 2. 1/4" Threaded Rod using the four corner slots in the top of the RPA. (Threaded Rod not included.) 3. 1 1/2" NPT Threaded Extension Column using the threaded opening at the top of the RPA Mount. (Threaded Extension Column not included).
• Convenient Lamp and Filter Access: Custom design of most RPA projector brackets provides needed access for: quick lamp changes, easy filter cleaning and proper projector ventilation.
• LSB-100 Lateral Shift Accessory: Often times ceiling structures will not allow the projector to be mounted in exact alignment with the projection screen. The LSB-100 Lateral Shift Accessory saves an abundance of time and hassles in trying to solve this common problem. The LSB-100 allows the projector to be shifted three inches right or left of the installation spot (5 3/4 inches on projectors under 15 lbs.). Also use the LSB-100 to easily accommodate different lens placement when projectors are replaced in existing installations. Compatible with all RPA and UPC Series Mounts, and maintains quick disconnect feature. Includes All-Points Security System hardware.

Specifications

	Roll Adjustment	+/- 4 degrees adjustment up or down. Loosen screw, adjust mount and tighten screw to hold adjustment.
	Pitch Adjustment	+/- 25 degrees adjustment on each side of the mount. Loosen screw, adjust mount and tighten screw to hold adjustment. Full range of pitch in a flush mount installation.
	Yaw Adjustment	360 degrees by turning the mount on the threaded column and securing in place with set screw. 12 degrees yaw possible on flush mount using slots in top of RPA.
	Column	1.5" NPT
	Weight Capacity	50 lbs.

All Prices in US Dollars