FEATURES
       Chief's RPA Series Inverted Ceiling Mount with the exclusive All-
        Points Security System is the top-selling projector mount in the 
        industry! More RPA Series Mounts are installed in offices, schools 
        and homes than any other mount. Why is the RPA so popular? Because 
        it gives you everything you need for a quick installation, low-
        profile look and hassle-free projector maintenance. Also, a winner 
        in the Media and Methods 2003 Awards Portfolio for making a 
        significant contribution to the school market. 
       The RPA is shipped with Chief s exclusive All-Points Security System
        - free-of charge and optional to use. (All-Points Security NOT 
        available with all RPA Series Mounts - not included ONLY if noted
        above in bold, orange text) All-Points is an integrated security 
        system that uses security hardware at all key connection points to
        protect projectors from theft. A steel-into-steel design makes All
        Points more effective than other integrated security systems.
* Low-profile, aesthetic design 
* Quick projector disconnect/reconnect 
* Steel-into-steel construction 
* UL listed for proven strength 
* Easy installation - no assembly 
* Independent roll, pitch and yaw adjustments make it easy to precisely 
  register the projector. 
* Disconnect without affecting adjustments 
* Convenient lamp and filter access 
* All-Points Security System included at no additional cost (not available 
  with all RPA Series Mounts) 
* Three ceiling mounting methods 
* Flush mount without disassembly 
* Allows cables to be routed through the top of the mount without 
  additional accessories. 
* Compatible with a large assortment of accessories to easily overcome a 
  variety of installation challenges.
* Allows lateral shift by adding the LSB-100 Lateral Shift Accessory 
* Compatible with the PG-1 Projector Guard Security Cage 
* Allows natural convection ventilation 
* Roll Adjustment: +/- 4 degrees adjustment up or down. Loosen screw, 
  adjust mount and tighten screw to hold adjustment. 
* Pitch Adjustment: +/- 25 degrees adjustment on each side of the mount. 
  Loosen screw, adjust mount and tighten screw to hold adjustment. Full
  range of pitch in a flush mount installation. 
* Yaw Adjustment: 360 degrees by turning the mount on the threaded column 
  and securing in place with set screw. 12 degrees yaw possible on flush 
  mount using slots in top of RPA. 
* Color: Black 
* Column: 1.5 inches NPT 
* Weight Capacity: 50 lbs. 
* Three Mounting Methods:
  - 1. Flush mount to suitable ceilings using the four corner slots in top 
       of the RPA Mount. The RPA allows you to flush mount without 
       disassembly by providing suitable access for screwdrivers and socket 
       sets.  25 degrees of pitch when flush mounted. 12 degrees yaw    
       possible on flush mount with slots in top of RPA (Hardware not 
       included).
  - 2. 1/4 inch Threaded Rod using the four corner slots in the top of the 
       RPA. (Threaded Rod not included.)
  - 3. 1 1/2 inch NPT Threaded Extension Column using the threaded opening
       at the top of the RPA Mount. 
* Convenient Lamp and Filter Access: Custom design of most RPA projector 
  brackets provides needed access for: quick lamp changes, easy filter 
  cleaning and proper projector ventilation. 
* Quick Projector Disconnect/Reconnect: To quickly and easily remove the 
  projector from the ceiling: loosen thumbnuts connecting the SLB bracket 
  to the universal top. Remove projector and SLB from universal top. The 
  universal top retains the registration adjustments. This feature makes 
  projector servicing and maintenance quick and easy by eliminating the 
  need for re-registration. Security wrench included for use when thumbnuts
  are replaced with All-Points Security System hardware. 
* LSB-100 Lateral Shift Accessory: Often times ceiling structures will not
  allow the projector to be mounted in exact alignment with the projection 
  screen. The LSB-100 Lateral Shift Accessory saves an abundance of time 
  and hassles in trying to solve this common problem. The LSB-100 allows 
  the projector to be shifted three inches right or left of the 
  installation spot (5 3/4 inches on projectors under 15 lbs.). Also use 
  the LSB-100 to easily accommodate different lens placement when 
  projectors are replaced in existing installations. Compatible with all 
  RPA and UPC Series Mounts, and maintains quick disconnect feature. 
  Includes All-Points Security System hardware.